EAM's POP-FLY

Read The E-Zone Review

by Jim Young

 

   

30" wingspan, Foam wings with balsa spar  GWS direct drive powered (not included) requires micro flight gear and7-8cell battery pack. Combos will be available soon !!! 8.3 Ounces  ready to fly as seen in Pictures 1 & 2

Version 2.0 full kit now with laser cut control horns, elevons and spars, supplied with 2 different colors of covering, Mylar Hinge tape, Printed building instructions and Foam winglets

Pop Fly Full Kit $40.00

 

Pop Fly V 2.0 Short Kits: $29.99

Due to requests from customers who do strange things with their Pop Flys we are proud to announce our new Pop Fly short kits.

Includes: Wing cores, Canopy & Tray, Nose Weight, Lazer Cut Balsa Elevons, Lazer cut Spars, Lazer Cut Control Horns, Pushrod Wire, Foam Winglets and Hinge Tape for Elevons. Instructions must be downloaded or viewed here:

Pop Fly PDF Instructions

 

Pop Fly Supplies :

NiMH 8.4V - 280mAh Jamara Micro 2G Speed Controller Part # 08 1005

Click on image for a larger view.
  Type: NIMH
  Voltage: 8.4V
  Weight: 1.98 oz (56.1 grams)
Capacity: 350 mAh
micro2g.JPG (9666 Byte)
Rating 5-8 Cells
Weight 2 Grams
Dimensions: 16x21x5mm
Extra long life Nickel Metal Hydride batteries for indoor or park flyer electrics. Basically the same size as and weight of a 110mAh NICAD batteries but with 350mAh capacity. Micro 2G - Slow Flyer                                                              SpeedControl                                                                                            Functions: Forward, B.E.C.
Continous Current: 5 Amp
ON Resistance: 11 m Ohm
Price: $18.00

Price: $24.95

IPS Direct Drive Power System  BMS-306 High Performance Sub-Micro Servo
Description: Recommended for converting rubber power models under 30" to electric. Contains carbon brush motor and two 3x2 props. Input 6 to 7.2 volts at 1.66 amps.
Weight: 6 Grams / 0.21 oz, Torque: 12.0 oz.in, Speed: 0.11 sec./60° at 4.8V
 
Click here for AVI video clip showing BMS-306 torque measurement (2.8Mb)
Click here for AVI video clip showing GWS Naro STD torque measurement (1.9Mb)
Torque measurements show in videos are in kg.cm.
 
Price: $12.00 

Price: $21.00
Tuf Stuf  
Eam's new lightweight film covering comes in 30" x 30" sheets available in: Clear, Purple, Red, Green, Yellow, Blue Replacement Canopy set for the Pop-Fly
Price: $2.00 Price: $6.00
Pop Fly Combo #1 Pop Fly Combo #2
Includes :

1 ea Pop- Fly Kit ( Red/Clear)

2 ea BMS-306 Sub Micro Servos

1 ea 7x350 Nimh Battery Pack

1 ea JST connector set

1 ea GWS IPS direct drive set

Includes  :

1 ea Pop- Fly Kit ( Red/Clear)

2 ea BMS-306 Sub Micro Servos

1 ea 7x350 Nimh Battery Pack

1 ea Hitech HSS3 FM Single stick transmitter w/ nicads and charger

1 ea GWS R4-P 4 channel sub micro receiver

1 ea MS  Micro D/C Charger for 7x280 Flight Pack

1 ea Jamara Banana Plug / Jst Charge Lead

1 ea JST connector set

1 ea Jamara Micro 2G 5A Submicro Speed Controller

1 ea GWS IPS direct drive set

Price : $100.00  you save 22.00 !! Price : $260.00     

 

 

Jamara BIT Servos ( same size as HS-50)  $26.00 ea or $44.00 per pair                                                                            (when purchased with the POP FLY only )

GWS 3x2 Prop $1.20 ea

 

 

HELMET.gif (5106 bytes)

 

Send mail to admin@eam.net with questions or comments about this web site.
Copyright © 1999 EAM/ Electric Aero Modeling USA